MATERIAL

Gap wave springs are the wave of the future. They are smaller, more efficient, and more durable than traditional coil springs. They are the perfect solution for applications where space is limited and performance is critical.

Wave springs have been around for centuries, but the recent development of overlap wave springs has led to renewed interest in these devices. Overlap wave springs offer a number of advantages over traditional wave springs, including reduced size and weight, increased flexibility, and improved performance. As a result, they are quickly becoming the wave of […]

In the configuration of the motor bearing system, springs are often used to preload some bearings. Large motors generally use cylindrical springs, and small motors

Multi turn wave springs is a material that is often used in daily life, and it has a wide range of uses. However, multi turn

What are the functions and functions of overlap wave spring? The overlap wave spring has the ability to save space. The overlap wave spring is an elastic element with several valleys in a thin metal ring. The main functions of the overlap wave spring are: The valve spring of the internal combustion engine, the control […]

Singlel-turn wave springs are used in a variety of applications, primarily designed for short deflections and low to medium forces, technology capable of providing a reliable and accurate fit.   The free end of a gap wave spring or overlap wave spring allows the outside diameter of the spring to increase during compression. Bonding […]

Using the correct spiral retaining ring material can avoid additional costs and mistakes in use. Carbon steel is the most common material. Although non-material steel is more expensive than carbon steel, it is far superior to carbon steel in terms of corrosion resistance and temperature resistance.   Carbon steel spiral retaining ring Oil Tempered Carbon Steel […]

The wave spring is referred to as the ripples, which is a thin piece of cyclocular elastic metal element composed of a number of peaks. This product uses high-quality spring steel 65MN (60si2MNA /50CRVA /0CR17NI7AL /SUS304). Between HRC44-55, it has good elasticity. Usually, the load and deformation are not large. It is required to apply […]

In this paper, through the force analysis of the wave spring washer, it is concluded that the root cause of the expansion of the spring washer is that the outer chamfer of the nut bearing surface is too large. To prevent the occurrence of ring expansion, the cause should be found from the matching nut and […]